Skip to Content
Black ceiling fan mounted in a bright living room

Ceiling Fans and Controls

Ceiling Fan Installation in Denver

The upstairs bedroom is ten degrees hotter than the rest of the house by August and the old light fixture is not helping. We handle ceiling fan installation in Denver, from swapping an existing fan to wiring a brand-new one where no fixture ever hung, on a box built to hold it.

  • Fan-rated boxes every time
  • New fans where no fixture exists
  • Vaulted and sloped ceilings
  • Remotes and smart controls set up

Get Your Free Estimate

Tell us about the job. We’ll call to talk it through and set up a time.

Required. Prefer to talk? Call (720) 668-5051. See our Privacy Policy.

What We Handle

Ceiling Fan Installation Services

  • Fan Replacement

    Swapping an existing fan or light for a new one, reusing the box only when it is truly fan-rated.

  • New Fan Where No Fixture Exists

    A new box, a wall switch and wiring run into rooms that never had ceiling power.

  • Vaulted and Sloped Ceilings

    Angled mounts and the right downrod so the fan hangs level and at a safe height.

  • Fan Box Bracing

    Fan-rated boxes and bracing between the joists so the fan stays put without wobble or creeping loose.

  • Outdoor and Patio Fans

    Damp- or wet-rated fans for covered patios and porches, wired with weatherproof boxes and connections.

  • Remotes and Smart Controls

    Wall controls, remotes and smart switches set up for speed, light and direction before we leave.

Ceiling Fan Installation Done on a Proper Box

A ceiling fan swings a motor and several blades over your head all day, and it shakes a little every time. The box it hangs from has to be made for that. A standard light box is not, and it is the most common problem when a fan starts to wobble or sag.

When we do ceiling fan installation in Denver, we check the box first, brace it if needed and then hang the fan. If you were searching for ceiling fan installation near me, we serve Denver, Aurora and the surrounding areas.

Replacing an Existing Fan or Light

Swapping a fan or a light fixture for a new fan is the most common job. We turn off the circuit, pull the old unit and inspect the box and the wiring. If the box is fan-rated, we reuse it. If not, we replace it with one that is.

We assemble the fan, hang it, balance the blades, test every speed and light, and clean up. You can buy the fan yourself or we can help you choose one that fits the room.

A New Fan in a Room With No Ceiling Fixture

Many older rooms, including some bedrooms and finished basements, have only wall outlets. The fix is new wiring and a wall switch, and we do that work without tearing the room apart.

We find a power source, run the cable through the attic or the wall, cut in a fan-rated box that braces to the framing and patch anything we open. Fans with a light and a separate fan control may need an extra wire to the switch, and we plan for that.

Vaulted Ceilings, Downrods and Sloped Mounts

A vaulted ceiling changes the fan. The mount has to allow for the slope, and the downrod has to bring the blades to the right height. Too short and the fan sits against the ceiling and moves little air. Too long and it hangs in your way.

Manufacturers give a recommended blade height above the floor and a maximum slope for each model. We measure the room, pick the downrod to match and check the rating before we start. Ladders and scaffolding for tall rooms are part of the job.

Outdoor Fans for Patios and Porches

Covered patios and porches get a lot of use in Denver summers, and a fan makes them far more comfortable. Fans outdoors need a rating. Damp-rated fans suit covered areas. Wet-rated ones suit places rain can reach.

We use weatherproof boxes and seal the connections, and we make sure the circuit has the protection code asks for outdoors. If you want an outlet or a light out there too, see our outlet and GFCI installation work.

Remotes, Wall Controls and Smart Fans

Most fans come with a remote or a pull chain. We can also install a wall control, a smart switch or a fan that works with your phone or a voice assistant. The control has to match the fan, so we pick the right one, wire it and pair it before we leave.

A fan with a light kit can use a separate dimmer, but it must be a model rated for it. Using the wrong one is a common cause of humming.

Fixing Wobble, Hum and Noise

If your fan wobbles, rattles, clicks or hums, we can often fix it without replacing it. We check the box and the mount, tighten and balance the blades and test the controls. A loose or undersized box is the cause more often than the fan.

When a fan is beyond saving, we replace it. A light or a fan that flickers or trips a breaker may need our electrical repairs service.

Upstairs Rooms That Run Hot in Denver Summers

The top floor of a house warms up first, and dry Colorado air can make a moving breeze feel better than the thermostat says. A fan won’t cool a room, but it can make it feel several degrees cooler, and it lets you run the air conditioning a little less.

In winter, many fans have a reverse switch that pushes warm air down from high ceilings. If you are upgrading the light at the same time, read about our lighting installation service.

What Affects the Price of Ceiling Fan Installation

We give every customer a written flat-rate price before work starts. The main things that change it are:

  • Whether a fan-rated box and wiring are already in place
  • Ceiling height and slope
  • New wire, a new switch or attic access
  • Indoor or outdoor fan
  • Extra controls or smart features

Ready to cool down a room? Give us a call or request a free estimate.

Our Process

How Your Ceiling Fan Installation Project Runs

Five steps from your first call to a passed inspection, so you always know what happens next.

  1. Tell Us What Is Going On

    Call or send the form. We ask the right questions up front so we show up with the right parts.

  2. On-Site Assessment

    A licensed electrician looks at your panel, the load and the access, then walks you through the options.

  3. Written Flat-Rate Quote

    You get an itemized price in writing with permit, materials and labor included, before any work starts.

  4. Clean, Permitted Install

    Floors protected, wiring neat, the panel labeled and the debris hauled away when we finish.

  5. Inspection and Walkthrough

    We meet the inspector, hand you the paperwork and photos, and show you how everything works.

  • “Jordan did a really good job on Installed EV charger at my home. He install the electrical wiring from the beggining to the end with out turn off the breaker. He works neatly and tidily. He also cover up the wired fron the breaker to the outlet. He cleaned all after done installed. he works very professionally.”

    Kathy NguyenGoogle review
  • “Jordan did a great job installing my EV charger. His communication throughout the process was excellent, and he was professional, knowledgeable, and easy to work with. He completed the installation in a timely manner and at a great price.”

    Danny NolanGoogle review
  • “I had a fantastic experience with Cedar Well Electric! They installed my EV charger and did an excellent job. The team was professional, knowledgeable, and took care with the installation. Everything works great, and I’m so happy with the result. I highly recommend them to anyone who needs an EV charger installed!”

    Maria JGoogle review

Questions

Ceiling Fan Installation FAQs

How Much Does Ceiling Fan Installation Cost in Denver?

It depends on whether a fan-rated box is already there, how high the ceiling is, whether we need new wire and a switch, and whether the fan is indoor or outdoor. A swap on an existing box is the simplest job. You get a written flat-rate price before any work starts.

Can You Install a Ceiling Fan Where There Is No Light Now?

Yes. We run new wire from a nearby circuit or switch, cut in a fan-rated box, add a wall switch and patch the ceiling. Attic access makes this simpler, and a finished ceiling below a second floor may take more work. We look at the space and tell you the plan first.

Does a Ceiling Fan Need a Special Box?

Yes. A fan is heavy and it moves, so code requires a box listed for ceiling fan support and firmly attached to the framing. A plain light box can work loose over time, which is how a fan starts to wobble or, worse, come down. We check the box on every job.

Can You Hang a Fan on a Vaulted Ceiling?

Yes. We use a mount built for the ceiling's slope and a downrod long enough that the blades clear the ceiling and hang at a comfortable height. The fan's manual lists the maximum slope it allows, so we check that before you buy one.

Why Does My Ceiling Fan Wobble or Hum?

Wobble usually comes from a loose box, unbalanced blades or a bent blade arm, and we can check all three. Hum often comes from the wrong dimmer or speed control, because fan motors need a control rated for them. We fix the cause instead of just tightening screws.

Talk to a Licensed Denver Electrician

Free estimates on installs and upgrades, a written price before any work starts, and permits handled for you.