EV Charger Installation in Denver, CO
We install Level 2 home charging for every EV brand across Denver metro — proper load calculation, permit, inspection and a tidy install that looks like it came with the house.
- Most installs land between $450 and $1,800
- Always Complated Same-day
- Licensed & insured · Permits pulled · 1-year workmanship warranty
Get your free estimate
Tell us what you need. A licensed electrician replies within one business hour.
- Licensed & insured · We reply within 1 business hour
Who we are
Denver's trusted EV charger installation experts
Cedarwell has wired Level 2 charging into garages, carports, alleys and detached shops all over Denver metro. We install Tesla, ChargePoint, Emporia, Grizzl-E, Wallbox, Autel and every other UL-listed unit — hardwired or on a NEMA 14-50, indoors or outdoor rated for a Colorado winter.
Every EV charger installation starts with a real NEC 220.87 load calculation rather than a guess, so you find out before you buy whether your panel needs an upgrade, a load-management device, or nothing at all.
What every job includes
- A licensed, background-checked electrician on site
- Written flat-rate pricing before work starts
- Permits pulled and inspections attended
- Photos of the finished work and a labeled panel
- One-year workmanship warranty in writing
12+
Years
2,100+
Jobs
4.9★
What's included
EV Charger Installation services we handle in Denver
Pick the piece you need, or let us scope the whole job — every option below is permitted, warrantied and quoted flat.
Level 2 Home Charger Install
40A, 48A or 60A dedicated circuit with hardwired or receptacle termination.
NEMA 14-50 Outlet Install
A code-compliant GFCI-protected 240V outlet for portable and mobile connectors.
Charger + Panel Upgrade
Bundled 200A panel upgrade when your existing service can't carry the load.
Detached Garage & Driveway Runs
Trenching, conduit and subpanels to get power where the car actually parks.
Dual-Vehicle & Power Sharing
Two chargers commissioned on a shared circuit for two-EV households.
Charger Repair & Relocation
Replacing failed units, moving chargers during remodels and fixing bad DIY installs.
Not sure which ev charger installation option you need?
Tell us what you're trying to power and we'll price the right scope — free, over the phone, in about ten minutes.
Why hire a pro
Benefits of hiring a licensed professional for EV Charger Installation
It isn't only about the finished result — it's about permits, safety, insurance and what happens when you sell the house.
01
Your panel is protected
A continuous 40–48A load on an unverified panel is how bus bars overheat. The load calculation isn't optional paperwork — it's the safety step.
02
Permit, inspection and resale value
Denver requires a permit for a 240V circuit. Permitted charging is an asset at resale; unpermitted work is a negotiating chip against you.
03
Rebates you can actually claim
Xcel Energy and city programs require itemized invoices and licensed-contractor details. We supply exactly what they ask for.
04
Warranty stays intact
Most charger manufacturers void coverage on non-licensed installs. Ours keeps the warranty and adds three years of workmanship cover.
Who needs this
Do you need EV Charger Installation?
If any of these sound like your home or building, it's worth a free assessment. We'll tell you honestly what's urgent, what can wait and what doesn't need doing at all.
You just bought an EV
The included 120V cord adds about 4 miles of range an hour — not enough for a Denver commute.
You're tired of public charging
Home Level 2 charging costs a fraction of DC fast charging and happens while you sleep.
Your garage has no 240V
Most Denver garages have a single 15A lighting circuit and nothing else.
You're a landlord, HOA or small business
Multi-unit and workplace charging needs metering, load management and permits done properly.
Why it matters
What you get with EV Charger Installation
Full-speed charging
A 240V, 40–60 amp circuit adds 25–40 miles of range per hour instead of 4.
Permitted and inspected
We pull the Denver or county permit and meet the inspector so the work is documented.
Rebate-ready paperwork
We provide the invoice and load details Xcel Energy and utility rebates ask for.
Scope of work
Included in every EV Charger Installation job
- Whole-home load calculation to NEC 220.87
- Dedicated 240V circuit sized to your charger
- Hardwire or NEMA 14-50 receptacle install
- GFCI protection and surge consideration
- Permit, inspection and panel labeling
- Charger commissioning and app setup
Our process
How your EV Charger Installation project runs
Five steps from your first call to a passed inspection. You always know what happens next.
01
Tell us what's going on
Send the form or call. We ask the right questions up front so the truck arrives with the right parts.
02
On-site assessment
A licensed electrician inspects the panel, load and access, then walks you through the options.
03
Flat-rate quote
You get an itemized price in writing — permit, materials and labor included. No surprises mid-job.
04
Clean, permitted install
Drop cloths down, shoes covered, tidy conduit, labeled panel, debris hauled away.
05
Inspection & walkthrough
We meet the inspector, hand over documentation and show you how everything works.
Why choose us
Reasons Denver homeowners keep our number
Denver homes are our specialty
Bungalows in Wash Park, split-levels in Aurora, new builds in Highlands Ranch — we know the panels, permits and inspectors in each jurisdiction.
Master electrician on every job
Your project is designed and reviewed by a master electrician, not handed to an unsupervised helper.
We show up in the window
Two-hour arrival windows with text updates. If we're running late, you hear it from us first.
No upsell theater
We tell you what's urgent, what can wait a year, and what doesn't need doing at all.
Clean job sites
Floor protection, dust control and a full cleanup. You shouldn't be able to tell we were there.
1-year workmanship warranty
On top of manufacturer coverage, our labor is warrantied for one full years.
Recent work
Jobs finished across Denver metro this season
Every job photographed, permitted and left cleaner than we found it.
Tesla Wall Connector — Golden
60-amp circuit, 38 ft of exterior conduit along a stone façade. Installed and inspected in one day.
200A panel upgrade — Wash Park
1948 bungalow on a 100-amp fuse panel. Full service upgrade plus a hardwired 48-amp charger.
Dual commercial stations — Aurora
Two networked Level 2 pedestals for a 30-employee office, with metering and ADA-compliant stall layout.
Testimonials
Rated 4.9 out of 5 by 187 Denver customers
Book EV Charger Installation in Denver
Flat-rate pricing, permits pulled, one-year workmanship warranty. Same-day appointments across the metro.
EV Charger Installation FAQs
How much does EV charger installation cost in Denver?
Do I need a panel upgrade for an EV charger?
Not always. We run a load calculation first — many 150A and 200A panels handle a 48A charger, and where they don’t, load management devices are often cheaper than a full upgrade.
Is a permit required for EV charger installation in Denver, CO?
Yes. A new 240V circuit requires a permit and inspection in Denver and surrounding jurisdictions. We pull it and meet the inspector.
How long does the install take?
Most installs take four to seven hours in a single visit.
Service area
Proudly Serving Denver and the Surrounding Metro
Aurora · Parker · Golden · Arvada · Brighton · boulder